After 9 years of testing and research, a system has been built that you can build-yourself and gain 10% - 20% in fuel economy! This is NOT Marketing Hype and it does not take a genius to build. Using simple hand tools and materials you can purchase in most hardware stores, you can construct your own HYDROCARBON CONVERTER that will increase your current fuel mileage, make your engine run cleaner and help your engine to last longer.

How does it work? All internal combustion engines produce hydrocarbons that go out a vehicle's tailpipe in large amounts and has been polluting our environment for years. The HYDROCARBON CONVERTER separates burnable fuel vapors from waste sludge and water and allows your engine to burn the clean fuel. If your vehicle uses a PCV (Positive Crankcase Ventilation) Valve, you are wasting fuel and fouling your engine with sludge, water and carbon. Almost every vehicle made since the 1960's has been equipped with a PCV Valve. The PCV was an easy solution to comply with EPA Regulations. The problem is it pulls sludge, water, oil mist and fuel vapors back into your engine. The fuel cannot be burned because it is mixed with water and sludge, so it goes into our air as pollution. The engine oil is contaminated with this mixture of oil sludge and water and breaks down, causing wear on your piston rings and engine bearings. The HYDROCARBON CONVERTER removes the water and oil sludge from your engine, prolonging it's life! The best part is you can build this converter yourself for about $38.00 in parts from most hardware stores!

I have created step by step illustrated and photographed plans for building your own HYDROCARBON CONVERTER and am willing to send you a copy for a donation of $15.00 US Funds.